|
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
BUILD |
Intro | Connectors | Motor | Touch Sensor | Light Sensor | Light Bulb | Pinout |
Motor for Handy Cricket
Part Listing
To build a motor for the Cricket, get the following parts:
- DC motor. This should be rated for 6 to 9v and up to 100 mA.
- One 0.1 uF capacitor. This is attached close to the motor terminals and helps smooth out electrical fluctuations generated by the motor.
- One 2-position "DF3" plug for Cricket motor port.
- Two wires with pre-crimped "DF3" connector.
- Three pieces 3/32" heat shrink.
Assembly Diagram
