Both Miniboard and Handyboard library have been ported to Gcc, the GNU C
compiler that is standard fare under any Linux distribution. However,
setting it up is a bit tricky since you must configure it as a cross
compiler for the 68HC11. You will also need the assember for the 68HC11,
which is not part of the gcc package, and the downloader for Linux to
download the pograms onto the miniboard or handyboard.
Start from the information contained in

ftp://ftp.eskimo.com/u/a/archer/gcc281-hc11-readme

You will find most of the needed files in the same directory on the same
server.
The miniboard library, however, is at:

ftp://ftp.cmf.nrl.navy.mil/pub/kenh/minilib.tar.gz


I use gcc 2.8.1 under Linux PowerPc and it works fine.


Hope it helps,


Stefano Franchi


_______________________________________________________________
Stefano Franchi

Department of Philosophy      Ph:  64-9-373-7599 ext 3940
University of Auckland        Fax: 64-9-373-7408
Private Bag 92019             e-mail: s.franchi@auckland.ac.nz
Auckland, New Zealand

Stefano Franchi


_______________________________________________________________
Stefano Franchi

Department of Philosophy      Ph:  64-9-373-7599 ext 3940
University of Auckland        Fax: 64-9-373-7408
Private Bag 92019             e-mail: s.franchi@auckland.ac.nz
Auckland, New Zealand