| 1. | Start GoldWave from Start Menu or icon. | ||
| 2. | If Device Controls window is not open, select it from the Tools option
on the Menu bar.
 |
||
| 3. | Click the New button, or choose New from the File option on the Menu
bar.
For the purposes of this tutorial select Mono from channels and click the Voice button. Make sure the Length is no longer than one minute. (30 seconds should suffice.) Click OK  |
||
| 4. | Microphone plugged in? | ||
| 5. | Hold down the control key, while clicking the Red Record button on
the Device Controls window.
|
||
| 6. | Sing...
Row Row Row your boat. Gently down the stream. Merrily Merrily Merrily, Life is but a dream. |
||
| 7. | Your sound will appear, so...
 |
||
| 8. | To trim the sound. Move the right blue marker by right clicking on
it and moving it toward the left.
 |
||
| 9. | Click the trim button from the button bar. Your sound will adjust
itself, so...
 |
||
| 10. | Click the copy button from the button bar. This will copy your sound into the buffer. | ||
| 11. | Play your sound, by clicking on the play button on Device Controls
window. Notice where "Row Row Row" starts and ends. Left click
your Mouse where "Row Row Row" stops. This is probably after the
first large block.
 |
||
| 12. | Click the Mix button from the button bar. | ||
| 13. | Repeat Step 11 and 12 one or more times. Now you have several rounds of "Row Your Boat" | ||
| 14. | Save your sound. | ||
| 15. | The following is an example:
|
