Return-Path: robot-board@oberon.com Received: by media.mit.edu (5.57/DA1.0.4.amt) id AA09207; Tue, 27 Apr 93 18:48:17 -0400 Received: from ([127.0.0.1]) by oberon.com (4.1/SMI-4.1_Shylock.MX) id AA00688; Tue, 27 Apr 93 18:47:43 EDT Date: Tue, 27 Apr 93 18:47:43 EDT Message-Id: <199304272245.AA08002@bitblks.bitblocks.com> Comment: Discussions of Robot controller boards Originator: robot-board@oberon.com Errors-To: gkulosa@oberon.com Reply-To: Sender: robot-board@oberon.com Version: 5.5 -- Copyright (c) 1991/92, Anastasios Kotsikonas From: bvs@BitBlocks.com To: Multiple recipients of list Subject: gcc11-386bsd.tar.z in cher.media.mit.edu:pub/miniboard/incoming Fred writes: > Heck, if anyone's got a binary available let's put it on cherupakha! I have put a gzipped tar file ``gcc11-386bsd.tar.z'' in the cher.media.mit.edu:pub/miniboard/incoming directory. This tar file contains gcc 6811 executables for the 386BSD version of Unix. (As usual, remember to use BINARY mode when you FTP). Once you get it, install it as follows. cd /usr/local gunzip < gcc-386bsd-6811.tar.z | tar xf - This will create bin/gcc-m6811-local bin/as11 bin/gcc11 lib/gcc-lib/m6811-local/2.3.3 lib/gcc-lib/m6811-local/2.3.3/as lib/gcc-lib/m6811-local/2.3.3/cpp lib/gcc-lib/m6811-local/2.3.3/specs lib/gcc-lib/m6811-local/2.3.3/cc1 lib/gcc-lib/m6811-local/2.3.3/include lib/gcc-lib/m6811-local/2.3.3/include/proto.h lib/gcc-lib/m6811-local/2.3.3/include/va-spur.h lib/gcc-lib/m6811-local/2.3.3/include/va-sparc.h lib/gcc-lib/m6811-local/2.3.3/include/va-pyr.h lib/gcc-lib/m6811-local/2.3.3/include/va-pa.h lib/gcc-lib/m6811-local/2.3.3/include/va-m88k.h lib/gcc-lib/m6811-local/2.3.3/include/va-mips.h lib/gcc-lib/m6811-local/2.3.3/include/va-i960.h lib/gcc-lib/m6811-local/2.3.3/include/va-i860.h lib/gcc-lib/m6811-local/2.3.3/include/va-alpha.h Note that bin/as11 is a link to lib/gcc-lib/m6811-local/2.3.3/as and bin/gcc11 is a link to bin/gcc-m6811-local. This is a straight port of COACTIVE's gcc + Serge Boentges's changes. So read Serge's & COACTIVE's notes on limitations and such. You can install the executables called by gcc11 in a directory other than /usr/local/lib/gcc-lib. If you do do this, remember to use -B or GCC_EXEC_PREFIX as I indicated in my previous mail. Note that you only need to specify directory prefix upto gcc-lib (if necessary, gcc will prepend m6811-local/2.3.3/ on its own). Try it out with Serge's light_show.c program! Compile it as gcc11 -o light_show.s19 -c light_show.c Have fun! Bakul Shah