# $Id: pnpdump.c,v 1.15a 1998/05/25 17:22:16 fox Exp $
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of this file format, see isapnp.conf(5)
#
# For latest information on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER
#
# Trying port address 0203
# Board 1 has serial identifier b6 ff ff ff ff 35 68 63 0e

# (DEBUG)
(READPORT 0x0203)
(ISOLATE PRESERVE)
(IDENTIFY *)

# Card 1: (serial identifier b6 ff ff ff ff 35 68 63 0e)
# Vendor Id CSC6835, No Serial Number (-1), checksum 0xB6.
# Version 1.0, Vendor version 0.1
# ANSI string -->CS4236B <--
#
# Logical device id CSC0000
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC6835/-1 (LD 0
#     ANSI string -->WSS/SB <--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       First DMA channel 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
  (DMA 0 (CHANNEL 3))
#       Next DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
  (DMA 1 (CHANNEL 0))
#       IRQ 5, 7 or 9.
#             High true, edge sensitive interrupt (by default)
  (INT 0 (IRQ 7 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0534
#             Maximum IO base address 0x0608
#             IO base alignment 212 bytes
#             Number of IO addresses required: 4
  (IO 0 (BASE 0x0534))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x0388
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
  (IO 1 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0240
#             IO base alignment 32 bytes
#             Number of IO addresses required: 16
  (IO 2 (BASE 0x0220))

#       Start dependent functions: priority acceptable
#       First DMA channel 0, 1 or 3.
#             8 bit DMA only
#             Logical device is not a bus master
#             DMA may execute in count by byte mode
#             DMA may not execute in count by word mode
#             DMA channel speed type A
# (DMA 0 (CHANNEL 0))
#       IRQ 5, 7, 9, 11, 12 or 15.
#             High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0534
#             Maximum IO base address 0x0ffc
#             IO base alignment 4 bytes
#             Number of IO addresses required: 4
# (IO 0 (BASE 0x0534))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0388
#             Maximum IO base address 0x03f0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 4
# (IO 1 (BASE 0x0388))
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0220
#             Maximum IO base address 0x0260
#             IO base alignment 16 bytes
#             Number of IO addresses required: 16
# (IO 2 (BASE 0x0220))

#     End dependent functions
  (ACT Y)
))
#
# Logical device id CSC000f
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC6835/-1 (LD 1
#     ANSI string -->Game <--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x03a0
#             Maximum IO base address 0x03f8
#             IO base alignment 8 bytes
#             Number of IO addresses required: 8
  (IO 0 (BASE 0x03a0))

#     End dependent functions
  (ACT Y)
))
#
# Logical device id CSC0010
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC6835/-1 (LD 2
#     ANSI string -->Ctrl <--
#     Logical device decodes 16 bit IO address lines
#         Minimum IO base address 0x0f00
#         Maximum IO base address 0x0fe8
#         IO base alignment 8 bytes
#         Number of IO addresses required: 8
  (IO 0 (BASE 0x0f00))
  (ACT Y)
))
#
# Logical device id CSC0003
#     Device supports vendor reserved register @ 0x38
#     Device supports vendor reserved register @ 0x3a
#     Device supports vendor reserved register @ 0x3e
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be changed if required
# Don't forget to uncomment the activate (ACT Y) when happy

(CONFIGURE CSC6835/-1 (LD 3
#     ANSI string -->MPU <--

# Multiple choice time, choose one only !

#     Start dependent functions: priority preferred
#       Logical device decodes 16 bit IO address lines
#             Minimum IO base address 0x0330
#             Maximum IO base address 0x03f0
#             IO base alignment 8 bytes
#             Number of IO addresses required: 2
  (IO 0 (BASE 0x0330))

#     End dependent functions
  (ACT Y)
))
# End tag... Checksum 0x00 (OK)

# Returns all cards to the "Wait for Key" state
(WAITFORKEY)