PmWiki | Student / LindaSonBat

Bat Models (Excel Files)
- MOI Excel Sheet: Jumper HW 7 Δ
- Finite Element Model Draft 1 Δ (4-4-08)
- Finite Element Model Draft 2 Δ (4-12-08) (due 4/14)
  Dr. Jumper, Draft 2 is what I completed with help from your Saturday morning help session (4/12). I added the calculations for the center of mass, MOI at the center of mass, and MOI at 6 inches. I believe it should be correct, but can you check it out and give some feedback?
  (Things to note: Dr. Jumper's comments about starting the X values at .5 in from the bat's ends, smoothing out transition between the 3 regions, ...)
- Finite Element Model Draft 3.0 Δ (4-14-08)
- F.E.M. Draft 4 Δ (5-15-08)
- My Individual Bat Fab Data Sheet Δ (5-17-08) (hw)
- My COMPLETED Individual Bat Fab Data Sheet Δ (6-02-08)
Reports
- My Design Report Draft 1 Δ (4-4-08)
- My Design Report Draft 2 Δ (4-18-08)
  - My Design Report Draft 2.1 Δ (4-27-08)
- My Final Design Report Δ