Material:
Paper
Ruler
Create
A wall
Procedure:
1. Draw a straight line on the paper and mark the measurement of mm on that line.
2. Place the paper next to the wall, but the line need to be perpendicular to the wall.
3. Place the Create on the paper, and the Create MUST be parallel, and 0mm, to the wall.
4. Send command to the Create through Realterm.
5a. Command to be send (Strength):
*128 132
*152 5 142 27 155 10 153
*153
5b. Command to be send (State):
*128 132
*152 5 142 8 155 10 153
*153
6. Record the data that the Create send back to Realterm when it is 0mm away from the wall.
7. Repeat #6 but this time the Create will be move away from the wall. (Can be 1mm away or 10 mm away)\\
