PmWiki | Student / ChandniSpringAssignments

Assistive Tech Assignments:
Baseball Bat Design Assignments:
- HW7 Excel Practice
  - I think the only thing I wasn't sure about was the last column and the formula we were supposed to use for it.
  - Chandni-Your formula from column I, =C3*(A3-CM)^2, should be =E3*(A3-CM)^2, since we are using 1 inch delta x elements the density and mass elements are identical, but if delta x were to change, say to 0.5 inches, then the error would show up.
  - Also, you need to calculate the MOI six inches from the bat handle, and now that you have MOI-CM you can use the parallel axis theorem and easily calculate MOI-6. You can do this in virtually any cell on the spreadsheet, within easy viewing area is best of course. Dr. J 080314
- HW7 Excel Practice: REVISED!
- Rought Draft of Bat Design Report Δ
  - 2nd Rought Draft of Bat Design Report (Sat. Apr. 19) Δ
- Final Draft of Bat Design Report Δ
- Initial Bat Design Model Δ
  - Bat Design Model 2 Δ
- Individual Bat Model Δ
  - Look at Sheet 2
  - Individual Bat Model (Sun. May 11) Δ
    - Still something wrong, can't find mistake
  - Individual Bat Model (Wed. May 14) Δ
  - Final Individual Bat Model (Sat. May 17) Δ
- Individual Bat Fabrication Datasheet
  - Shell Data Only Δ
  - Complete Data Δ
- Group Research Project
  - Presentation Δ
  - My Group Contribution Δ