Cricket Tutorial — Motor Command setpower

You can control the motor power using the command setpower. You have to indicate a power level from 1 to 8.

turns on motor A continuously.

sets motor A to power 1.

sets motor A to power 2.

sets motor A to power 4.

sets motor A to power 5.

sets motor A to power 7.

sets motor A to power 8.

turns off motor A.

  The first time the Virtual Cricket loads there will be a short delay.
Please be patient.

What do you think happens if you change the power level when the motor is off?

When you first turn the Cricket on, its outputs are at power level 4. So remember, if you need more power, you can increase it up to 8.

 

BACK: Motor Commands 3

UP to index

NEXT: Using Lamps