Cricket Tutorial — Using Lamps

The Cricket's outputs can also be used to power lamps. Try using the setpower commands with a lamp plugged into output B.

turns on output B continuously.

sets output B to power 1.

sets output B to power 2.

sets output B to power 4.

sets output B to power 5.

sets output B to power 7.

sets output B to power 8.

turns off output B.

  The first time the Virtual Cricket loads there will be a short delay.
Please be patient.

What do you think happens if you try the thisway, thatway, or rd commands with a lamp?

Try it:

 

BACK: Motor Commands 4

UP to index

NEXT: Lamps and Motors Together